Minimum requirements:

• Minimum 10 years of experience in the same role
• Must have experience of drilling rigs equipment, operation & Maintenance, overhauling & Commissioning of land Rigs.
• Currently located in UAE (Preferably)
• Preferably not more than 45 years of age

Note: This post is for future job opportunities only

Basic Function : To undertake plumbing maintenance, repair and installation work of taps, showers toilets and other facilities at workshop and rigs.

Work Performed :

a)            Receives verbal work assignments from Supervisor. Evaluates work scope and participants in ordering parts required. Responds to emergency calls and effects temporary or permanent emergency repairs.

b)            Inspects and dissembles plumbing fixtures or piping joints to determine cause of malfunction, cleans, repairs, or replaces faulty parts, reassembles, and tests for proper functioning.  Such units include sinks, taps, toilets, filters, and the like.

c)            Installs, maintains and repairs plumbing fixtures, appliances, and related piping, such as sinks, toilets, baths, water heaters, storage tanks and filters, fire hydrants, drainage lines and sewage lines.  Includes locating unit, installing, using such hand tools as wrench, hacksaw, pipe bending machine and other hand tools and cementing in place, caulking ceramic joints, connecting to water and drainage lines and testing to check operation of unit and integrity of lines.

d)            Responds to emergency calls and repairs faulty plumbing installations.  Includes testing piping systems by filling with water or air and reading pressure gauges to detect leakages and wrapping or clamping pipes or replacing pipe sections to effect repair.  Unblocks water supply, drainage or sewer lines as requested.  Cleans and lubricates tools, related machines and equipment and maintains them in good working order.

e)            Performs simple soldering, welding and general pipe fitting duties which include cutting pipes, threading and tapping and preparing pipes for jointing or welding and cleaning up after jobs.

f)             Carries out modifications to hot water systems to improve flow or pressure by changing valves or inlet pip sizes. Makes adjustment to thermostat temperature setting on water heaters when required.

g)            Performs related duties as assigned such as observing safety and fire regulations, restoring work area to clean and orderly condition participating in the work of other craftsmen as requested, maintaining stocks of consumables by drawing from store and the like.

Accountability:

The position is accountable for:

a)            Responding to and resolving problems relative to the supply and removal of water

b)            Installing and testing all manner of new water supply and drainage facilities including sewage lines

c)            Plumbing in such domestic items is emersion heaters, washing machines and the like.

d)            Making connections of pipes by soldering or any other means necessary

e)            Modifying existing systems as required

f)             Maintaining stocks of consumables

HSE Responsibility:

Each job holder has the following individual responsibility in respect of the company’s integrated HSE policy.

a.            Complying with all safety notices and signs

b.            Wearing protective clothing and using the appropriate protection equipment when necessary

c.             Reporting any hazard, potential hazard, accident or near miss of which they are aware

d.            Their own personal safety health and conduct

e.            The safety and health of other persons which may be affected by their actions or omissions

f.             Switching off lights/electrical equipment upon departure from the work area      

g.            Avoidance of tripping hazards by requesting correct routing of cables and the like

h.            The correct usage of associated equipment

i.              Practising good housekeeping

j.             Practising the use of safety belts in company cars

k.            Minimising fire and health hazards associated with tobacco smoking.

Work Contacts :  Regular work contacts,  limited to  immediate work  associates  at own level to receive and/or give instructions or to clarify work instructions.

Independence of Operation : Works according to standard instructions,  well defined procedures and craft standards.

Physical Effort : 80% - Using medium weight tools, equipment, lifting and carrying materials such as pipes, valves and taps.

Work Environment : 50% - Exposed to prevailing operating and weather conditions of heat, humidity, vibration noise, fumes and dirt.

Minimum Requirements :

a)            Completion of Preparatory (9 years) education, followed by 2 years’ formal training in plumbing.

b)            4 years experience in a similar job.

c)            Good knowledge of English.  

Please send us the following required documents and details.

1. Updated resume in word document format

2. Photo with white background

3. Coloured passport copy (Front and back)

4. If cancelled, cancellation copy

5. Visit visa copy (If on visit visa) and validity

6. Availability for interview if shortlisted

7. Current Location:

8. Contact Number:

9. Email Address:`

Basic Function : Perform welding and fabrication activities related to new manufacture and repair of steel structures and equipment.

Work Performed:

a)            Works Reads and understands the provided sketches/drawings for fabrication activities.

b)            Withdraws materials required as per the drawings from the warehouse as per NDC procedures.

c)            Welding shall be performed as per welding procedures provided by the company. Care shall be taken to ensure proper upkeep of the welding consumables as stated in the procedures.

d)            Prepares material cutting plan based on the sketches/drawings to ensure optimum use of the structural steel with minimum wastage.

e)            Cuts material gas torch or sharing machine as per cutting plan and suitably identifies them for ease during fabrication.

f)             Deburries the cut edge using hand grinders, chisels, files etc. and prepares the welding surface.

g)            Performs welding activities using SMAW and TIG welding techniques.

h)            Ensures NDT is performed by third party on the weld, as applicable. In case any welding defects are observed the same shall be rectified and NDT repeated by third party.

i)             Assist in the preparation of field requisitions to obtain welding supplies at locations during Major Maintenance.

j)             Complies with all safety regulations and practices during the course of work.

k)            Performs other related duties such as proper care of welding machines, welding consumables, quivers, welding rod, storage ovens etc. Good housekeeping of their work area.

Accountabilities:

The position is accountable for:

a)            Setup and tack weld the cut pieces together as indicated in the fabrication drawing.

b)            Perform quality welding as per applicable welding procedures.

c)            Reporting the details of material used and time spent on each job to his immediate supervisor.

d)            Ensures that welding certificate expiry date is informed to the supervisor well in advance for timely renewal.

e)            Ensures timely renewal of the following documents as applicable: Onshore security pass, Offshore security pass, ADMA travel card, ZADCO optima card, ADCO driving license, Emirates ID, Basic firefighting and First aid, H2S, Passport.

HSE Responsibility:

Each job holder has the following individual responsibility in respect of the company’s integrated HSE policy.

a)            Complying with all safety notices and signs

b)            Wearing protective clothing and using the appropriate protection equipment when necessary

c)            Reporting any hazard, potential hazard, accident or near miss of which they are aware

d)            Their own personal safety health and conduct

e)            The safety and health of other persons which may be affected by their actions or omissions

f)             Switching off lights/electrical equipment upon departure from the work area      

g)            Avoidance of tripping hazards by requesting correct routing of cables and the like

h)            The correct usage of associated equipment

i)             Practicing good housekeeping

j)             Practicing the use of safety belts in company cars

k)            Minimizing fire and health hazards associated with tobacco smoking.

Work Contacts :  Has regular contact with immediate supervisor and other colleagues for daily work activities.

Independence of Operation :

a)            Duties are performed in accordance with established procedures and specialized technical welding standards.

b)            Completed work is spot-checked by supervisor.

Physical Effort : 90% - Physical  effort,  involving  the  movement  and  used  of   medium   weight welding equipment,  related tools and materials.

Work Environment : 90% - Exposed to prevailing weather conditions, heat, humidity, dirt, fumes torch flames for most of the working time.

Minimum Requirements :

a)            Completion of Secondary (12 years) education followed by 2 years’ formal training in welding.  Formal Welding Certification 6G.

b)            3 years’ experience in all types of welding.

c)            Basic knowledge in English.  

Please send us the following required documents and details.

1. Updated resume in word document format

2. Photo with white background

3. Coloured passport copy (Front and back)

4. If cancelled, cancellation copy

5. Visit visa copy (If on visit visa) and validity

6. Availability for interview if shortlisted

7. Current Location:

8. Contact Number:

9. Email Address:`

Basic Function: Dismantle, repair, assemble and test the various electrical equipment used in the rigs.

Work Performed:

a)            Reads and understands the electrical drawings and circuits.

b)            Receives the various defective electrical equipment from the rigs for repair.

c)            Analyses the false and orders for the required materials for repair in consultation with Electrical Foreman.

d)            Performs overhauling of electrical motors including replacement of bearing, re-varnishing of winding using air drying varnish, baking of motor windings to expel moisture.

e)            Conversant with use of electrical hand tools like volt meter, ammeter, megger etc.

f)             Performs function test of the repaired equipment during commissioning activities.

g)            Visits rig sites and locations for performing work as advised by the immediate supervisor.

h)            Co-operates with other sections during equipment trials.

i)             Maintains records of work performed, materials used and time consumed on every job and communicate to the immediate supervisor.

j)             Performs preventive maintenance and repair activities of the various equipment in BAO as instructed by the immediate supervisor.

Accountability:

The position is accountable for:

a)            Undertakes repair of mechanical equipment as instructed by the Electrical Foreman.

b)            Cleaning of equipment and components.

c)            Maintaining the work area in a clean and orderly condition.

d)            Disposing of used materials and items in the approved manner.

e)            Ensures timely renewal of the following documents as applicable: Onshore security pass, Offshore security pass, ADMA travel card, ZADCO optima card, ADCO driving license, Emirates ID, Basic firefighting and First aid, H2S, Passport.

HSE Responsibility:

Each jobholder has the following individual responsibility in respect of the company’s integrated HSE policy.

a)            Complying with all safety notices and signs

b)            Wearing protective clothing and using the appropriate protection equipment when necessary

c)            Reporting any hazard, potential hazard, accident or near miss of which they are aware

d)            Their own personal safety health and conduct

e)            The safety and health of other persons which may be affected by their actions or omissions

f)             Switching off lights/electrical equipment upon departure from the work area      

g)            Avoidance of tripping hazards by requesting correct routing of cables and the like

h)            The correct usage of associated equipment

i)             Practicing good housekeeping

j)             Practicing the use of safety belts in company cars

k)            Minimizing fire and health hazards associated with tobacco smoking.

Work Contacts: 

a)            Has daily contact with immediate supervisor and other colleagues for daily work activities.

b)            Has daily contact with personnel in stores area when drawing items from store.

Independence of Operation:

a)            Duties are performed in accordance with clear instructions from immediate supervisor.

b)            Some routine work, undertaken independently is checked upon completion.

Physical Effort :

a)            The entire work period is spent standing at the work bench with occasional lifting of heavy and unwieldy motors and/or parts using a hoist when necessary.

b)            Hand tools used on the larger items are considerable in size

Work Environment :

a)            100% of the time is spent in the workshop which contains limited air conditioning; heat, fumes, and dust are all present to a considerable degree in the summer months.

b)            The job necessitates using solvents and abrasive materials

Minimum Requirements :

a)            Completion of Secondary (12 years) education plus 2 years' industrial training in Electrical Engineering.

b)            4 years’ experience as an electrician in an oil drilling rig.

c)            Basic knowledge of English.

Please send us the following required documents and details.

1. Updated resume in word document format

2. Photo with white background

3. Coloured passport copy (Front and back)

4. If cancelled, cancellation copy

5. Visit visa copy (If on visit visa) and validity

6. Availability for interview if shortlisted

7. Current Location:

8. Contact Number:

9. Email Address:`

Basic Function: To undertake a variety of carpentry work, including constructing or repairing woodwork in an assigned location. It includes fabricating boxes for materials/parts, wood-plating rear box for pick-ups, repairing doors, windows, partitions, ceiling, floor, and walls of premises.

Work Performed:

a)            Replaces wooden floor on heavy-duty trucks beds, taking measurements and cutting materials to required size using measuring tools and hand or machine tools provided and ensuring snug fit.      

b)            Fabricates boxes for materials/tools/parts etc, to be used in despatching items to/from rigs. Takes measurements, obtains materials and constructs to required measurements and or shape.

c)            Constructs and installs wooden rear box for pick-ups for delivery items/materials required in various locations/rigs. Ensures that fitting is undertaken in a secure manner so that transportation of such items can be undertaken safely.

d)            Receives requests for the construction of such as cupboards, cabinets, and shelving for storage of tools equipment and spare parts. Ensures that the construction is secure, adding locks when required and uses hand and power tools to install

e)            Undertakes carpentry work on the rigs such as repairing windows, doors, ceilings, floors, stairs, cupboards, shelves, moving partitions and the like. Uses measuring tools to establish measurements and hand tools to repair items. Fabricates furniture and fittings, taking measurements and assessing material requirements. Ensures that the work is completed in a satisfactory manner and that the work area is left in a clean and safe condition.

f)             Performs related duties as assigned, such as attending work areas where a problem has been reported or where work is to be undertaken, ordering materials and such consumables as tacks, glue and other materials.

Accountability:

The position is accountable for:

a)            Undertaking carpentry and associated work at an assigned location.

b)            Taking care to make sure all measurements are accurate

c)            Interpreting diagrams and drawings

d)            Ensuring that the work area is left in a clean, safe and orderly condition.

HSE Responsibility:

Each job holder has the following individual responsibility in respect of the company’s integrated HSE policy.

a)            Reading and complying with the relevant content of the HSE manual

b)            Complying with all safety notices and signs

c)            Wearing protective clothing and using the appropriate protection equipment when necessary

d)            Reporting any hazard, potential hazard, accident or near miss of which they are aware

e)            Their own personal safety health and conduct

f)             The safety and health of other persons which may be affected by their actions or omissions

g)            Switching off lights/electrical equipment upon departure from the work area      

h)            Avoidance of tripping hazards by requesting correct routing of cables and the like

i)             The correct usage of associated equipment

j)             Practicing good housekeeping

k)            Practicing the use of safety belts in company cars

l)             Minimizing fire and health hazards associated with tobacco smoking.

Work Contacts : Regular contacts with immediate job associates to obtain details of work requirements and to receive instructions from supervisors.

Independence of Operation :  Works in accordance with established procedures and specialised technical standards.  Completed work is spot-checked by supervisor.

Physical Effort : Physical effort, involving the movement and use of medium weight carpentry equipment, related tools and materials is necessary for approximately 90% of the work period.

Work Environment :       Approximately 90% exposure to prevailing weather conditions, heat, humidity and dirt for the majority of the work period.

Minimum Requirements :

a)            Satisfactory completion of a Secondary (12 years) education.

b)            5 years experience in all types of carpentry work.

c)            Fair knowledge of English in order to understand requirements.

Please send us the following required documents.

1. Updated resume in word document format

2. Photo with white background

3. Coloured passport copy (Front and back)

4. If cancelled, cancellation copy

5. Visit visa copy (If on visit visa) and validity

6. Availability for interview if shortlisted

7. Current Location:

8. Contact Number:

9. Email Address:`

Basic Function: Surface preparation and painting of fabricated structures and other equipment.

Work Performed:           

a)            Protects suitably the equipment name plates and other machined surfaces before blasting and painting.

b)            Cleans the surface to be blast free of any oil grease or other contaminates before blasting.

c)            Uses the blasting equipment, with full consideration of HSE requirements, to achieve the required surface profile on blasting.

d)            Ensures NDT is performed by the third party on the blast surface, as applicable, before primer painting.

e)            Uses spray gun for paining the accessible surface and uses rollers or brushes for the inaccessible areas.

f)             Ensures usage of paint on first in first out basis from the temporary store.

g)            Maintains equipment and work area in a clean, orderly, and useful condition by cleaning using hand tools/rags etc., provided and cleaning spray nozzles upon completion if spraying using chemicals to maintain a clear nozzle for the next job.

h)            Assists in the preparation of field requisitions, by advising supervisor of requirements when consumable such as grit, paint chemicals and the like require replenishing.

i)             Advises the Blasting/Painting Foreman of work performed, materials used, and time taken upon completion of a specific job in order that correct charges can be made for the work.

j)             Performs fibre coating of SCR house roofs, caravans etc.

Accountability:

The position is accountable for:

a)            Protects the surfaces, as requested, and perform blasting to the specified surface profile.

b)            Clean the surface before blasting using wire brushes, degreases and the like.

c)            Masking the surfaces to prevent any damage due to blasting or painting.

d)            Obtaining necessary materials

e)            Maintaining equipment in good condition (particularly spray nozzles)

f)             Advising supervisor of materials used and time taken for the job

g)            Ensures timely renewal of the following documents as applicable: Onshore security pass, Offshore security pass, ADMA travel card, ZADCO optima card, ADCO driving license, Emirates ID, Basic firefighting and First aid, H2S, Passport.

HSE Responsibility:

Each job holder has the following individual responsibility in respect of the company’s integrated HSE policy.

a)            Complying with all safety notices and signs

b)            Wearing protective clothing and using the appropriate protection equipment when necessary

c)            Reporting any hazard, potential hazard, accident or near miss of which they are aware

d)            Their own personal safety health and conduct

e)            Switching off lights/electrical equipment upon departure from the work area      

f)             Avoidance of tripping hazards by requesting correct routing of cables and the like

g)            The correct usage of associated equipment

h)            Practicing good housekeeping

i)             Practicing the use of safety belts in company cars

j)             Minimising fire and health hazards associated with tobacco smoking.

Work Contacts :  Have regular contacts with immediate supervisor to obtain details of work requirements and instructions.

Independence of Operation :

a)            Duties are performed in accordance with established procedures and specialised painting standards.

b)            Completed work is spot-checked by supervisor prior to equipment being released to the owner.

Physical Effort : 90% - Considerable physical effort is required for approximately 90% of the work period, involving the movement and used of medium weight painting equipment, related tools and materials.

Work Environment : Exposure to prevailing weather conditions, heat, humidity, dirt, and paint fumes for approximately 90% of the work period.

Minimum Requirements :

a)            Completion of Secondary (12 years).

b)            5 years’ experience in blasting and painting activity.

c)            Basic knowledge in English.

Please send us the following required documents and details.

1. Updated resume in word document format

2. Photo with white background

3. Coloured passport copy (Front and back)

4. If cancelled, cancellation copy

5. Visit visa copy (If on visit visa) and validity

6. Availability for interview if shortlisted

7. Current Location:

8. Contact Number:

9. Email Address:`

We are currently looking for Registered Nurses for one of our clients (Homecare) in Abu Dhabi with below minimum qualifications:

• Willing to work in home-care setting in Abu Dhabi Emirate
• With DOH (HAAD) license/data flow on process/willing to take DOH examination
• Female only
• With minimum 2 years of experience as RN

Should you be interested, please send us the following to globalr7@careps.ae or you may apply directly to this website:

• Updated resume in word document format with photograph
• Current location
• Nationality
• Currently salary, if employed in UAE
• Visa status, if currently in UAE (If on visit visa, mention the expiration date)
• Mention if you are DOH license holder/data flow on process/willing to take DOH examination

Qualifications:

• Indian Nationality
• 24 to 33 year old
• Must be currently located in Abu Dhabi, UAE
• Minimum 2 years' experience in the same role
• University graduate

We are currently looking for Filipino Nurses (Female only) for one of our clients in Homecare in Abu Dhabi, UAE.

Requirements:

- With at least 2 years of experience in any field of Nursing as a Registered Nurse.
- Holder of HAAD license, DHA license, USA license/HAAD exam passer/With on going data flow/With data flow completed/willing to process data flow immediately
- Willing to work in home care setting in Abu Dhabi
- Not more than 45 years old

Should you be interested, please send your updated CV in word document format with photo and the following to globalr7@careps.ae/globalr3@careps.ae
1. Current location
2. Current salary, if employed in UAE
3. Salary expectation
4. Date of birth